12 62 Coolant Temperature
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - COOLANT TEMPERATURE
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Temperature sensor to water flange (glow time/coolant temperature gauge) | M21 | 18 Nm | ||
| M51 | 13 Nm | |||
| 2AZ Temperature switch (5.5°C/17°C) to fuel filter/cylinder head | M21 | 18 Nm | ||
| 3AZ Coolant temperature sensor (2-pin plug-in connection) | S38/S50 | 13 Nm | ||
| S85 | M12/1.52 | 13.5 Nm | ||
| All/others | 20 Nm | |||
| 4AZ Remote thermometer sensor (2-pin plug-in connection) | All | 20 Nm | ||
| Remote thermometer sensor (4-pin plug-in connection) | M62 | 16 Nm | ||
| S62 | M12 x 1.5 | 14 Nm | ||
| 5AZ Remote thermometer sensor on coolant flange | S50 | 18 Nm | ||
| 6AZ Temperature sensor - air | S38/S50 | 13 Nm | ||
| 7AZ Temperature sensor - oil | S38/S50 | 13 Nm |