11 36 Variable Camshaft Control
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS with sensor wheel to inlet and exhaust camshafts | N54 | M10x94 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 180 ° | |||
| 2AZ Non-return valve VANOS to cylinder head | N54 | M14 x 1.5 | 13 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N54 | M6x12 | 10 Nm |