11 61 Intake manifold
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - INTAKE MANIFOLD
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hexagon screw Air intake manifold to cylinder head. |
N54 | M7 x 50 | 15 Nm | |
| 2AZ Hexagon nut Air intake manifold to cylinder head. |
N54 | AM7 | 15 Nm | |
| 3AZ Hose clamp Gaiter, rear charge-air duct to front charge-air duct. |
N54 | L65-72 | 3 Nm |