11 14 Case Covers
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CASE COVERS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Transmission cover plate to crankcase Aluminum screws/bolts are permitted with and without color coding (blue). |
N54 | M6x16 | Replace screws Thread repairs exclusively with Al Helicoil Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 4 Nm | |||
| Torque angle | 45 ° |