11 11 Engine Block, Cylinder Crankcase N54 B30
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK, CYLINDER CRANKCASE SPECIFICATIONS
| Bore _ stage 0a) | mm | 84.000+0.014 |
| Bore _ stage 00 a) | mm | |
| Bore _ stage 1 a) | mm | 84.250+0.014 |
| Permitted out-of-round of cylinder bore a) | mm | 0.005 |
| Permitted conicity of cylinder bore a) | mm | 0.01 |
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 |
a) new status or recondition