LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Distance Systems, Cruise Control - Repair - F01/F02) >> Parking Assist System >> 66 33 008 Removing and installing / replacing park assist control unit

66 33 008 Removing and installing / replacing park assist control unit

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work: 

Remove RIGHT LUGGAGE COMPARTMENT WHEEL ARCH PANEL .

Unlock plug connection (1) and disconnect.

Pull out parking maneuvering assistant control unit (2) towards top out of mounting (3).

Fig 1: Identifying Control Unit, Mounting, And Connector
G00523532Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out PROGRAMMING/ENCODING .