37 12 012 Carrying out ride height adjustment
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Ride height adjustment must be carried out after the following work:
- Removal/replacement of ride height sensor or its control rod (only necessary on vehicles with air suspension)
- Replacement of EHC control unit
- Replacement of ICM control unit (Integrated Chassis Management)
Connect BMW diagnosis system.
Switch the ignition on.
Carry out ride height adjustment (menu item: "Service function").
IMPORTANT:
Following ride height adjustment:
- Vehicles with Run Flat Indicator, INITIALIZE RUN FLAT INDICATOR
- Vehicles with Tire Pressure Monitor, RESET TIRE PRESSURE MONITOR