52 14 207 Removing and installing ambient light

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove rear panel on rear seat backrest. See REMOVING REAR PANEL (NORMAL/ELECTRIC SEAT) or REMOVING REAR PANEL (COMFORT SEAT) .

NOTE: The procedure for fitting the ambient light may differ, depending on the equipment specification.

Version 1:

Release shaft clamping rings (1).

Detach plug (2) from light guide.

Installation note:

Make sure plug is correctly engaged on light guide.

Remove ambient light.

Fig 1: Identifying Shaft Clamping Rings And Light Guide Plug

Courtesy of BMW OF NORTH AMERICA, INC.

Version 2:

Loosen clamps (1).

Detach plug (2) from light guide.

Installation note:

Make sure plug is correctly engaged on light guide.

Remove ambient light.

Fig 2: Identifying Light Guide Plug And Clamps

Courtesy of BMW OF NORTH AMERICA, INC.