3. Checking rubber seal

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Check the bonded gaskets for correct positioning and perfect adhesion. The bonding can be checked by pressing back the sealing lip.
The force required to peel off the gasket immediately after bonding must be greater than 10 N/cm.