51 31... General Procedure When Dismantling/Installing Bonded Window Glass: Notes
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
Follow general instructions on window bonding:
1. General instructions on window bonding
- See INFORMATION ON VEHICLE PROTECTION
- See MATERIALS FOR BONDING WINDOW
- See SAFETY AT WORK
- See TOUCHING UP PAINTWORK DAMAGE
NOTE:
The vehicle can be towed away or driven without a windscreen, rear window and side window.
When carrying out disassembly/installation work and during the hardening time, the vehicle must be standing on its wheels on a level surface.
The windscreen, rear window and side windows are glued to the body. This bonding will increase the torsional rigidity of the vehicle. To obtain perfect bonding, comply with the installation procedure described in the following.