LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Heating And Air Conditioning - Repair - F01/F02) >> Auxiliary Heater With Control Elements >> 64 12 570 Replacing turbocharger coolant pump for auxiliary heating >> Notes

64 12 570 Replacing turbocharger coolant pump for auxiliary heating: Notes

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Risk of burning!

Repair work on the cooling system may only be carried out when it has cooled down.

Recycling: 

Coolant emerges when coolant lines are detached. Have a suitable collecting vessel ready.

Catch and dispose of emerging coolant.

Observe country-specific waste disposal regulations.

NOTE: Clamp off COOLANT HOSES .

Necessary preliminary work: 

NOTE: Graphic similar.

Release screws (1).

Remove lower left cover (2).

Fig 1: Identifying Lower Left Cover Screws
G06886282Courtesy of BMW OF NORTH AMERICA, INC.

Release spring strap clips (1).

Detach coolant hoses (2).

Fig 2: Identifying Spring Strap Clips And Coolant Hoses
G09929405Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Release screw (2) and remove retaining bracket.

Remove turbocharger coolant pump (3).

Fig 3: Identifying Plug Connection, Screw And Turbocharger Coolant Pump
G09929406Courtesy of BMW OF NORTH AMERICA, INC.