LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Heating And Air Conditioning - Repair - F01/F02) >> Air Conditioning System >> 64 52... Instructions for opening and replacing parts in refrigerant circuit >> Notes

64 52... Instructions for opening and replacing parts in refrigerant circuit: Notes

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Avoid contact with refrigerant and refrigerant fluid
  • Read and comply with SAFETY INFORMATION .
IMPORTANT:
  • Always use new O-rings each time A/C connections are opened
  • They must not  be coated.

    Use special tool 00 9 030 to install sealing rings without damaging them.

  • Open the refrigerant circuit for as short of a period as possible.
  • Close all components and lines in the refrigerant circuit and return parts immediately  following the removals at openings with special tool 32 1 270 to prevent penetration of moisture or foreign objects.
  • If the refrigerant circuit was closed at the openings with special tool 32 1 270 but it remains open for more than 24 hours, the dryer insert for the air conditioning must be replaced.