86 10... Removing overrunning equipment/maintaining or replacing guide bush/installing overrunning equipment: Notes
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
After installing overrunning equipment, readjust brake system, refer to ADJUSTING BRAKE SYSTEM
Check the guide bush while installed to ascertain whether it needs to be replaced. Raise ball end area and replace guide bush if play is detected in ball end area.
NOTE:
After installing, readjust and check brake system.
Release round head screws (1) and remove running board (2) towards top.