61 11... Installing repair cable for reversing camera
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
Read and comply with notes on HANDLING WIRING HARNESSES AND WIRING .
NOTE:
Work is shown on the F01 by way of example. There may be differences in detail in the case of other vehicle types and equipment specifications.
Remove trim panels.
Lay repair cable from reversing camera (3) along wiring harness (2) up to TRSVC control unit (1, middle slot) and secure sufficiently.
After successful completion of function check , detach start and end of faulty cable at first mounting point.