Installation note

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Make sure guide (3) is correctly seated in frame (2).

Fig 1: Identifying Board On Frame And Guide

G06895074

Courtesy of BMW OF NORTH AMERICA, INC.

If anti-theft alarm system is fitted, make sure USIS sensor lead (1) is correctly seated in retaining tabs (2) on frame (3).

Fig 1: Identifying USIS Sensor Lead And Retaining Tabs On Frame

G06895075

Courtesy of BMW OF NORTH AMERICA, INC.

Clip light pressed screen (1) into light unit (2).

Installation note:

Make sure pin (3) is correctly seated on board (4).

Fig 2: Identifying Light Pressed Screen On Light Unit And Pins On Board

G06895076

Courtesy of BMW OF NORTH AMERICA, INC.

Install bulbs (1) in light pressed screen (2).

Installation note:

Note BULB TYPE .

Fig 3: Identifying Bulbs On Light Pressed Screen

G06895077

Courtesy of BMW OF NORTH AMERICA, INC.

Screw down base (1) to roof switch cluster (2).

Fig 4: Identifying Roof Switch Cluster With Base

G06895078

Courtesy of BMW OF NORTH AMERICA, INC.

Carry out VEHICLE PROGRAMMING/ENCODING