LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (General Electrical System - Repair - F01/F02) >> Switch >> 61 31 197 Removing and installing/renewing center console operating facility >> Installation

61 31 197 Removing and installing/renewing center console operating facility: Installation

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

For an uniform join, press center console operating unit (1) sideways up against center console trim (3).

The centering ribs (1) must touch the center console trim (3).

Fig 1: Identifying Centering Ribs On Center Console Trim
G06895021Courtesy of BMW OF NORTH AMERICA, INC.

Join center console operating facility (2) to center console trim (3).

Tighten down the screws (1).

Fig 2: Identifying Center Console Operating Unit With Screws And Center Console Trim
G06895020Courtesy of BMW OF NORTH AMERICA, INC.