LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (General Electrical System - Repair - F01/F02) >> Switch >> 61 31 117 Removing and installing/replacing power window switch (driver's side)

61 31 117 Removing and installing/replacing power window switch (driver's side)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work: 

Pull locking pins (1) out of frame (2) for power window switch (3).

Press power window switch (3) upwards in direction of arrow and remove.

Fig 1: Pressing Power Window Switch
G06895039Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Make sure power window switch (3) is correctly guided (1) and engaged (2).

Fig 2: Identifying Power Window Switch
G06895040Courtesy of BMW OF NORTH AMERICA, INC.