61 31 038 Removing and installing/replacing switch for front passenger airbag deactivation
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
WARNING:
Read and comply with SAFETY REGULATIONS
for handling airbag modules and pyrotechnical belt pretensioners.
Incorrect handling can lead to airbag deployment and cause injury.
Necessary preliminary work:
- Disconnect BATTERY EARTH CABLE
Carefully lever out side cover (1) with special tool 00 9 323 .
Disconnect plug connection (1).
Release latch mechanisms (4) in direction of arrow.
Feed switch for front passenger airbag deactivation (2) out of side cover (3).
Installation note:
Make sure switch for passenger airbag deactivation (2) is correctly seated in side cover (3).