LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (General Electrical System - Repair - F01/F02) >> Plug Connection, Terminal, Fuse Box >> 61 13... Opening contacts and locks of different plug contact systems >> 61 13... In-line connectors, 30-pin, System D2.5

61 13... In-line connectors, 30-pin, System D2.5

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Carefully pull external connector (1) in area of retaining lugs (2) apart slightly.

Fig 1: Identifying External Connector And Retaining Lugs
G00425962Courtesy of BMW OF NORTH AMERICA, INC.

Pull internal connector (3) until limit position in direction of arrow.

Fig 2: Pulling Internal Connector In Direction Of Arrow
G00425963Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 , press down retaining hook (4) of corresponding contact and pull out cable with contact.

Fig 3: Identifying Arrester Hook And Special Tool 61 1 132
G00425964Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals