LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (General Electrical System - Repair - F01/F02) >> Plug Connection, Terminal, Fuse Box >> 61 13... Opening contacts and locks of different plug contact systems >> 61 13... Circular connector, 7-pin, 8-pin, system D2.5

61 13... Circular connector, 7-pin, 8-pin, system D2.5

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Carefully pull off rubber grommet (1).

Carefully press back retaining lugs (2) of internal connector (3).

Fig 1: Pressing Back Retaining Lugs Of Internal Connector
G06894939Courtesy of BMW OF NORTH AMERICA, INC.

Slide internal connector (3) in direction of arrow until retaining lugs (2) lock into locking groove (4).

Fig 2: Sliding Internal Connector
G06894940Courtesy of BMW OF NORTH AMERICA, INC.

Use special tool 61 0 303 (61 1 132) to press back retaining hook (5) of corresponding contact and pull out cable with contact.

Fig 3: Pressing Back Retaining Hook Using Special Tool (61 0 303)
G06894941Courtesy of BMW OF NORTH AMERICA, INC.