61 35 015 Removing and installing (replacing) control unit for Car Access System

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary work:

Disconnect BATTERY GROUND LEAD
Remove TRIM PANEL FOR PEDAL MECHANISM .

Disconnect plug connection (1).

Release screw (2).

Tightening torque 61 35 1 AZ .

Remove control unit for Car Access System (3) in direction of arrow.

Fig 1: Removing Control Unit For Car Access System

G06895092

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Feed guide (1) of control unit for Car Access System (2) correctly into associated mounting.

Fig 2: Identifying Car Access System With Guide

G06895093

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out PROGRAMMING/ENCODING

For vehicles with rear-seat entertainment (RSE):

Teach in RSE master key via path:

Body
Rear seat entertainment system
Teach in radio remote control
Radio remote control