54 12 Mechanical components, slide/tilt sunroof
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - MECHANICAL COMPONENTS, SLIDE/TILT SUNROOF
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Glass slide/tilt sunroof cover to gate | F01/F02/F04/F10 | M5x6 w/washer | Replace screw. | 5 ± 0.5 Nm |
| F07/F11/F25 | Replace screw. | 4.5 Nm | |||
| 2AZ | Slide/tilt sunroof unit to body | F01/F02/F04/F10 | Self-locking | 7.6 Nm | |
| F07/F11/F25 | Screws, self-tapping | 5.4 Nm | |||
| 3AZ | Floating headlining to sliding rail | F01/F02/F04/F10/F11 | M5x6 | Observe screwing sequence | 2 ± 0.2 Nm |
| 4AZ | Carriage, water channel, to gate | F01/F02/F04/F10 | 3.8 Nm | ||
| 5AZ | Panorama glass roof rear section - active and passive elements | F07/F11/F25 | 5.4 Nm | ||
| 6AZ | Both floating roof liners to gate | F11 | 2.0 Nm | ||
| 7AZ | Stacker for floating roofliner | F11 | 2.0 Nm | ||
| 8AZ | Water channel to glass lid mechanism | F11 | 2.0 Nm | ||
| 9AZ | Wind deflector to cross member | F25 | Tighten screw with special tool 00 9 250 to 0.8 Nm. | 0.8 Nm | |
| 10AZ | Stop screw | F11 | 2 Nm | ||