51 11 Front Bumper
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FRONT BUMPER
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Bumper to air duct, top | F01/F02/F03/F04/F07/F10/F11/F18 | 4 Nm | ||
| 2AZ | Deformation element, top or bottom, to vertical connection | F01/F02/F03/F04/F07/F10/F11/F18 | 11.8 Nm | ||
| 3AZ | Deformation element to engine support | F01/F02/F03/F04/F07/F10/F11/F18/F25 | M12 | Replace bolts | |
| Jointing torque | 80 Nm | ||||
| Angle of rotation | 270 ° | ||||
| 4AZ | Support to deformation element | F01/F02/F03/F04/F07/F10/F11/F18 | Replace screws and nuts | 27 Nm | |
| F25 | M8 | 20 Nm | |||
| 5AZ | Support to deformation element, bottom | F01/F02/F03/F04/F07/F10/F11/F18 | 11 Nm | ||
| 6AZ | Deformation element, bottom, to adapter plate, front axle support | F01/F02/F03/F04/F07/F10/F11/F18 | 19 Nm | ||
| 7AZ | V - support to deformation element, top | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | 19 Nm | ||
| 8AZ | Number plate to bumper | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | 1 Nm | ||
| 9AZ | Number plate to bumper (thread repair) | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M5 | 4.5 Nm | |
| 10AZ | Support, bottom, to deformation element, bottom | F01/F02/F03/F04/F07/F10/F11/F18 | 11 Nm | ||
| 11AZ | Bumper to side wall | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | 3 Nm | ||