33 52 Shock Absorbers
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - SHOCK ABSORBERS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Support bearing to body | F01/F02/F03/F04/F10/F12/F13/F18 | M8 | Replace nuts. | 28 Nm |
| F07/F11 | M8 | Replace screws. | 28 Nm | ||
| F25 | M8 | Replace screws. Jointing torque and angle of rotation must be observed without fail. |
|||
| Jointing torque | 25 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 2AZ | Support bearing flange to shock absorber | F01/F02/F04/F07/F10/F11/F12/F13/F18 | M12 | Replace nut. | 27 Nm |
| F25 | M12 | Replace nut. | 34 Nm | ||
| 3AZ | Shock absorber to wheel carrier | F01/F02/F04/F10/F12/F13/F18 | M16 | Replace screw. TIGHTEN DOWN IN NORMAL POSITION . |
250 Nm |
| 4AZ | Shock absorber to swinging arm | F07/F11 | M14 | Replace screw. TIGHTEN DOWN IN NORMAL POSITION . |
165 Nm |
| 5AZ | Spring strut to camber rod | F25 | M14 | Replace screw and nut. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||