33 55 Anti-roll bar
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Retaining bracket, anti-roll bar to rear axle support | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M10 | Replace screws. | 56 Nm |
| F25 | M8 | Screw renew. | 34 Nm | ||
| 2AZ | Anti-roll bar link on anti-roll bar/swinging arm | F01/F02/F03/F04/F07/F10/F11/F12/F18/F25 | M10 | Replace nuts. | 56 Nm |
| F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M12 | Replace nuts. | |||
| Jointing torque | 45 Nm | ||||
| Angle of rotation | 45° | ||||
| 3AZ | Vibration absorber to anti-roll bar bracket | F07/F10/F11/F12 | 19 Nm | ||
| 4AZ | Anti-roll bar link to wheel carrier | F25 | M10 | Replace screw. | 56 Nm |