11 36 Variable camshaft control
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | VANOS gear to inlet and exhaust camshafts | N63 | M10x1 | Replace screw | |
| Jointing torque | 30 Nm | ||||
| Torque angle | 90 ° | ||||
| 2AZ | Non-return valve VANOS to cylinder head | N63 | M14 x 1.5 | 13 Nm | |
| 3AZ | Solenoid valve holder to cylinder head | N63 | M6 | 10 Nm | |