51 13 435 Removing and installing/replacing additional brake light, rear lid cover

Special tools required:

Necessary preliminary tasks:

Unscrew nuts (1).

Tightening torque 51 13 8AZ .

Unfasten plug connection (2) and disconnect.

Fig 1: Identifying Plug Connection And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Raise and unclip additional brake light (1) with special tool 00 9 317 .

Remove additional brake light (1).

Replacement:

Subsequent operation described in REMOVING ADDITIONAL BRAKE LIGHT .

Fig 2: Removing Additional Brake Light Using Special Tool (009 317)

Courtesy of BMW OF NORTH AMERICA, INC.