84 11 519 Removing and installing/replacing eject box

Necessary preliminary tasks:

Release cable tie (1).

Unlock retaining lugs (2).

Press eject box (3) upwards.

Installation:

Replace cable tie (1).

Retaining lugs must not be damaged.

Fig 1: Identifying Cable Tie, Eject Box And Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Remove eject box (1) upwards from center console (2).

Installation:

Ensure correct cable routing.

Fig 2: Identifying Eject Box And Center Console

Courtesy of BMW OF NORTH AMERICA, INC.