51 46 072 Removing and installing/replacing lower partition panel
Necessary preliminary tasks:
- Clamp off BATTERY LEAD FROM NEGATIVE TERMINAL
- Remove CENTER CONSOLE .
- Remove UPPER PARTITION TRIM PANEL
- Remove REAR SIDE TRIM PANEL (BOTTOM)
NOTE:
Both seats are shown removed for purposes of clarity.
Professional HiFi system only:
Release mid-range speaker screws (2).
Unlock plug connection for mid-range speaker and disconnect.
Remove mid-range speaker.
Release screws (1).
Tightening torque 51 46 7AZ .
Remove clips (2).
Raise protective caps for storage net holder and release screws (3).
Tightening torque 51 46 7AZ .
Release partition panel (1) at catches (2). Disconnect necessary plug connections.
Remove partition panel (1).
Replacement
Modify covers or lashing eyes (4).
Professional HiFi system only:
Modify speaker covers of bass speaker on left and right.