3200 Steering, Measurement
3200 STEERING - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Steering box to front axle support | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace screws. Joining torque Angle of rotation |
100 Nm 90° |
| F01/F02/F07/F10/F11/F12/F13, Four-wheel drive | M14 | Replace screws and nuts. Joining torque Angle of rotation |
100 Nm 105° |
|
| F03 | M14 | 165 Nm | ||
| F25/F26 | M12 | 100 Nm | ||
| F15/F16/F85/F86 | M10 | Replace screws.
|
24 Nm 90° 56 Nm 90° |
|
| 2AZ Electro-hydraulic converter on steering gear | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F15/F16 | 3 Nm | ||
| 3AZ Heat shield to steering gear | F15/F16 | 8 Nm | ||
| 4AZ Holder on steering gear | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | 8 Nm | ||
| 5AZ Active steering pipe (union nut, internal line on the steering gear) | F15/F16 | M8 | 10 Nm | |
| 6AZ Active steering pipe (hold-down device hexagon socket screw, internal line on steering gear) | F15/F16 | M8 | 18 Nm |