31 11 904 Additional work when lowering/raising front axle support with Dynamic Drive (X6 2015-2019)
IMPORTANT:
Risk of damage!
Follow operations must be carried out during lowering:
Follow operations must be carried out during lowering:
- Remove REINFORCEMENT PLATE .
- N55, N63 only: Release return line on power steering cooler.
- Remove charge air line (N57, N55)
- Remove all hydraulic lines on front axle support or anti-roll bar retaining bracket and tie up.
Installation note:
- N55, N63 only: Perform START-UP WITH TEST RUN OF DYNAMIC DRIVE .