12 41 020 Removing and installing/replacing starter motor (N55) (X6 xDrive 35i, X6 sDrive 35i)

Necessary preliminary tasks: 

• Switch off ignition.
• Disconnect BATTERY NEGATIVE LEAD .
• Remove INTAKE PLENUM .

Unlock connector (1) and remove.

Release nuts (2) and disconnect positive battery cables.

Tightening torque 12 42 2AZ .

Release screws (3).

Installation note: 

Tightening torque 12 41 1AZ .

Tightening torque 12 41 2AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Remove starter motor (4).

Installation note: 

Check starter pinion and ring gear for damage. Replace starter motor if necessary.