Mounting engine on assembly stand (N63O1)
Special tools required:
- 00 2 300
- 11 0 020
- 11 8 930
- 11 8 931
- 11 8 932
WARNING:
Remove engine with hoist and special tool 11 0 020.
Fit special tool 11 8 930 on engine.
Engine weighs approx. 280 kg.
Fit special tool 11 8 930 on engine.
Engine weighs approx. 280 kg.
Necessary preliminary tasks:
- Fully remove front axle together with engine.
- Remove engine from front axle.
- Clean contact surfaces.
Use special tool 11 8 931 to mount special tool 11 8 932.
Insert screws (1 and 2).
Tightening torque: 11 11 9AZ .
Use special tool 11 8 931 to mount engine on special tool 00 2 300.
Tightening torque: 11 11 10AZ .
Graphic shows N63.