1362 SENSOR FOR CONTROL UNIT (X6 sDrive 35i, X6 xDrive 35i)
1362 SENSORS FOR CONTROL UNIT - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Coolant temperature sensor | N55 | M12x1.5 | 18 Nm | |
| 2AZ Suction pressure sensor/differential pressure sensor | N55 | K50x18 | 3.5 Nm | |
| 3AZ Camshaft sensor to cylinder head | N55 | M6x16 | 8 Nm | |
| 4AZ Oil temperature sensor to engine block | N55 | M6x16 | 5 Nm | |
| 5AZ Knock sensor to crankcase | N55 | M8x30 | 21.5 Nm | |
| 6AZ Connector housing, crankshaft sensor, to crankcase | N55 | M6 | 8 Nm | |
| 7AZ Crankshaft sensor to crankcase | N55 | 5 Nm |
1362 TIGHTENING TORQUE OVERVIEW
| Hot film air mass meter to upper section of intake silencer housing | ||
| 3.5 Nm | ||