13 71 000 Removing and installing/replacing intake silencer housing (N63) (X6 xDrive 50i)

Necessary preliminary tasks: 

• Switch off ignition.
• Remove ACOUSTIC COVER .
• Remove INTAKE PORT .

Unlock and pull off connector (1) from hot film air mass meter on left and right.

Release clamps (2).

Tightening torque 13 71 2AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off intake silencer housing (1) upwards from rubber mounts.

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.