1151 COOLANT PUMP WITH DRIVE (X6 sDrive 35i, X6 xDrive 35i)
1151 COOLANT PUMP WITH DRIVE - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Coolant pump to crankcase | N55 | M8 x 26 | Replace screws. Thread repairs exclusively with aluminum Helicoil threaded insert. Joining torque and angle of rotation must be observed without fail. Joining torque Angle of rotation |
10 Nm 90° |
| 2AZ Coolant pump to holder (only for vehicles with holder). | N55 | M8 x 27 | Replace screws. Thread repairs exclusively with aluminum Helicoil threaded insert. Joining torque and angle of rotation must be observed without fail. Joining torque Angle of rotation |
10 Nm 90° |
| 3AZ Coolant hose between coolant pump and coolant thermostat. | N55 | L42-48 | 3 Nm | |
| 4AZ Coolant hose between coolant pump and feed line. | N55 | L42-48 | 3 Nm | |
| 5AZ Auxiliary water coolant holder for EME to retaining bracket | N55, F10h/F01h/F02h/F30h | M6 x 14 | 10 Nm |