11 22 510 Removing and installing/replacing flywheel (transmission removed - N63) (X6 xDrive 50i)
Special tools required:
- 11 9 260
Necessary preliminary tasks:
- Remove AUTOMATIC TRANSMISSION .
Automatic transmission:
Release flywheel screws in area (1).
Remove flywheel (2).
Installation note:
Clean thread of flywheel bolts in crankshaft.
Flywheel (2) is secured with an alignment pin.
Fit flywheel (2).
Fit new flywheel screws .
Tightening torque 11 22 1AZ .
Manual transmission:
Release flywheel screws in area (1).
Remove flywheel (2).
Installation note:
Clean thread of flywheel bolts in crankshaft.
Flywheel (2) is secured with an alignment pin.
Fit flywheel (2).
Fit new flywheel screws .
Tightening torque 11 22 1AZ .
Reassemble the vehicle.