1831 EXHAUST PIPE (X6 sDrive 35i, X6 xDrive 35i)
1831 EXHAUST PIPE WITH CATALYTIC CONVERTER / COMPLETE SYSTEM - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exhaust system to catalytic converter | N55 | Clamp | 55 Nm | |
| 2AZ Catalytic converter to turbocharger | N55 | M8 x 40 | Replace clamp | 13 Nm |
| 3AZ Clamp | N55 | 45 Nm | ||
| 4AZ Exhaust system to body | N55 | M8 | 19 Nm | |
| 5AZ Actuator drive for exhaust system to exhaust system | N55 | M6 | 9 Nm |