1710 EXPANSION TANK (X6 sDrive 35i, X6 xDrive 35i)
1710 RADIATOR, EXPANSION TANK, LINES (N55) - TIGHTENING TORQUE SPECIFICATION 1710 RADIATOR, EXPANSION TANK, LINES (N55) - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Assembly, cooling module: module carrier cover, oil-to-water heat exchanger, thermostat with housing, power steering cooler | N55 | K60 x 20 | 5 Nm | |
| 2AZ Expansion tank to spring strut dome | N55 | M6 | 8 Nm | |
| 3AZ Transmission oil cooler to front axle | N55 | M6 | 8 Nm | |
| 4AZ Cross-strut to front axle | N55 | M10 | 56 Nm | |
| 5AZ Transverse reinforcement to body | N55 | M8 | Replace screws. Joining torque Angle of rotation |
10 Nm 90° |
1710 TIGHTENING TORQUE OVERVIEW 1710 TIGHTENING TORQUE OVERVIEW
| Front charge-air duct to fan cowl | ||
| 5 Nm | ||