1136 VARIABLE CAMSHAFT TIMING CONTROL (X6 sDrive 35i, X6 xDrive 35i)
1136 VARIABLE CAMSHAFT CONTROL - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS with sensor wheel to inlet and exhaust camshafts | N55 | M10x94 | Replace screw Joining torque Torque angle |
20 Nm 180° |
| 2AZ Non-return valve VANOS to cylinder head | N55 | M14 x 1.5 | 13 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N55 | M6x12 | 9 Nm |