1124 CONNECTING ROD WITH BEARING (X6 xDrive 50i)

1124 CONNECTING RODS AND BEARINGS - TIGHTENING TORQUE SPECIFICATION

	Type	Thread	Tightening specifications	Dimension
1AZ Connecting rod bolt (new connecting rod with new connecting rod bolts)	N63 O1	M9x1.25 Release screws. Suction off crack surfaces.	1. Joining torque	5 Nm
			2. Joining torque	20 Nm
			3. Joining torque	30 Nm
			3. Angle of rotation	75°
2AZ 1. Special screw connection only with new connecting rod bolts.	N63 O1	M9x1.25	1. Joining torque	5 Nm
			2. Joining torque	20 Nm
			3. Joining torque	30 Nm
			4. Angle of rotation	75°
2. Loosen screws			5. Loosen screw.	180°
			6. Joining torque	5 Nm
			7. Joining torque	20 Nm
			8. Joining torque	30 Nm
			9. Angle of rotation	75°
3. Loosen screws			10. Loosen screw.	180°
			11. Joining torque	5 Nm
			12. Joining torque	20 Nm
			13. Joining torque	30 Nm
			14. Angle of rotation	75°
4. Loosen screws			15. Loosen screw.	180°
			16. Joining torque	5 Nm
			17. Joining torque	20 Nm
			18. Joining torque	30 Nm
			19. Angle of rotation	75°