26 20 000 Removing and installing front propeller shaft (X6 xDrive 35i, X6 xDrive 50i)

IMPORTANT: Do not move vehicle under its own drive power once propeller shaft has been removed.

IMPORTANT: On four-wheel drive vehicles with defective, non-engaging drive, it is imperative that the following information is taken account of.

Necessary preliminary tasks:

Release screws.

Installation note:

Replace ZNS bolts.

Tightening torque 26 11 7AZ .

Slide propeller shaft towards rear and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Slide propeller shaft fully towards rear.

Sealing cup (1) must snap audibly into place and rest entirely on dust guard (2).

Courtesy of BMW OF NORTH AMERICA, INC.