52 26 005 Removing and installing/replacing rear seat (through-loading facility) (X6 2015-2019)
Unclip rear seat on left and right towards top.
Installation note:
Feed seat belt buckles (1) into recesses in rear seat.
Only on vehicles with seat heating and/or rear compartment blower:
Unlock plug connections (1) and disconnect.
F15 Complete removal only:
Release screw (1) on seat belt (middle).
Tightening torque 72 11 22AZ .
Installation note:
Seat belt is coded against incorrect installation.
Feed out anchor fitting (2) through rear seat.
Lift out rear seat.