5116 Mirrors, Decorative Strips, Ashtrays, Consoles
5116 MIRRORS, FINISHERS, ASHTRAYS, CONSOLES - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exterior mirror to front door | F01/F02/F03/F04/F07/F10/F11/F18 | thread cutting | New exterior mirror initial screw connection | 6 Nm 8 Nm |
| F15/F16/F25/F26/F85/F86 | thread cutting | New exterior mirror initial screw connection | 9 Nm 11 Nm |
|
| F06/F12/F13 | thread cutting | 8 Nm | ||
| 2AZ Sun visor to body | F01/F02/F03/F04/F07/F10/F11/F18/F25/F26 | 2.5 Nm | ||
| 3AZ Grab handle, front/rear | F01/F02/F03/F04/F07/F10/F11/F18 | 3 Nm | ||
| 4AZ Support, center console | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | 4.5 Nm | ||
| 5AZ Floor trim panel to carrier | F01/F02/F03/F04 | 2.5 Nm | ||
| 6AZ Decorative trim to center console/support | F01/F02/F03/F04/F06/F12/F13 | 1.2 Nm | ||
| 7AZ Holder, center console, front, middle, to tunnel | F01/F02/F03/F04 | 4.5 Nm | ||
| 8AZ Center console to instrument panel | F01/F02/F03/F04 | 2.5 Nm | ||
| 9AZ Decorative trim to center console | F01/F02/F03/F04 | Dia. 5 mm | Oval-head screw for light alloy | 4 Nm |
| F01/F02/F03/F04 | TS5 x 12 | Plastic screw | 2.8 Nm | |
| 10AZ Center console/support to dashboard | F01/F02/F03/F04 | 2.5 Nm | ||
| F12/F13 | 1.2 Nm | |||
| 11AZ Trim, rear, with rear compartment nozzle | F01/F02/F03/F04 | 2.5 Nm | ||
| 12AZ Rear console to body shell holder | F01/F02/F03/F04 | 6 Nm | ||
| 13AZ Oddments tray, center armrest, to support, center console | F01/F02/F03/F04/F07 | 1.5 Nm | ||
| F06/F12/F13 | 1.2 Nm | |||
| 14AZ Handle to inner part, lid, glovebox | F01/F02/F03/F04/F25/F26 | 1.5 Nm | ||
| 15AZ Lid, glove box/end cover to housing | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 1.5 Nm | ||
| 16AZ Glove box/storage compartment to dashboard | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 1.8 Nm | ||
| F25/F26 | 2.4 Nm | |||
| 17AZ Guide rail, roller sunblind, B-pillar | F01/F02/F03/F04 | Self-tapping screw, black | 2 Nm | |
| F03 | Replace screws. | 2.5 Nm | ||
| 18AZ Roller sunblind module | F01/F02/F04 | Oval flange head screw (ISA) | 3 Nm | |
| F03 | 8 Nm | |||
| F06/F07/F10/F11/F18 | 1.5 Nm | |||
| F25/F26 | 0.7 Nm | |||
| 19AZ Electric motor to function carrier | F01/F02/F04 | Flat-head screw | 4.4 Nm | |
| F03 | 8 Nm | |||
| 20AZ Engine to function carrier, top | F01/F02/F04 | Oval-head screw | 2 Nm | |
| F03 | 3 Nm | |||
| 21AZ Vent window guide rail - window bar connection | F03 | 4.6 Nm | ||
| 22AZ Center console to support | F07 | 1.8 Nm | ||
| 23AZ Bracket, handle, to bodyshell | F01/F02/F04 | 3 Nm | ||
| 24AZ Support to holder, support part | F12/F13/F06 | 2.5 Nm | ||
| 25AZ Side bracket to support | F06/F12/F13 | 1.2 Nm |