5210 Front Seats
5210 FRONT SEATS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Seat to floor panel | F15/F16/F85/F86 | (trilobular) | Replace Powerlok screw | 42 Nm |
| 2AZ Backrest frame to seat frame | F15/F16/F85/F86 | M10 | 38 Nm | |
| 3AZ Seat rails to seat mechanism | F15/F16/F85/F86 | M10 | 25 Nm | |
| 4AZ Seat pan to side part of seat, front Seat pan to side part of seat, rear |
F15/F16/F85/F86 | Screw | 15 Nm | |
| Screw with nut | 7 Nm | |||
| 5AZ Ground contact, continuous injection floor mat | F15/F16/F85/F86 | 4.5 Nm | ||
| 6AZ Shaft for backrest angle to backrest frame | F15/F16/F85/F86 | 8 Nm | ||
| 7AZ Drive for backrest angle adjustment to backrest frame | F15/F16/F85/F86 | 6 Nm | ||
| 8AZ Drive seat angle adjustment to seat frame | F15/F16/F85/F86 | M8 | Screw | 8 Nm |
| M6 | Nut | 7 Nm | ||
| 9AZ Drive for seat height adjustment to seat frame | F15/F16/F85/F86 | M6 | 14 Nm | |
| M8 | 18 Nm | |||
| 10AZ Drive/transmission for backrest upper section adjustment | F15/F16/F85/F86 | 5.5 Nm |