63 17 070 Removing and installing/replacing left fog light (X6 2015-2019)
IMPORTANT:
Follow notes for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
NOTE:
The time value of this job item does not include adjustment of the FOG LIGHTS !
Unlock fog light (1) at clamp (2) using suitable tool.
Remove fog light (1) in direction of travel.
Unfasten plug connection (1) and disconnect.
Remove fog light (2).
On replacement of fog light or bumper panel at front:
- If necessary, remount BULB , check BULB TYPE .
- ADJUST FOG LIGHTS .