51 45 075 Removing and installing support for dashboard (X6 2015-2019)

Necessary preliminary tasks: 

• Remove INSTRUMENT PANEL TRIM .
• Remove HEAD-UP DISPLAY .
• Remove STEERING COLUMN .

Release screws (1).

Remove air duct (2).

Installation note: 

Ensure that air duct (2) is correctly seated on the heater/air conditioner unit.

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Tightening torque 51 45 2AZ .

Release screw (2).

Tightening torque 51 45 1AZ .

Unfasten plug connection (3) and disconnect.

Release screws (1).

Tightening torque 51 45 8AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Release cable retainer for wiring loom (2) and feed out wiring loom (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 51 45 3AZ .

Release cable retainer for wiring loom (2) and feed out wiring loom (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Tightening torque 51 45 2AZ .

Unfasten screws (2).

Release cable retainer (3) and thread out relevant wiring loom.

With the aid of a second person, remove the mounting bracket while checking for any more cable retainers.

Courtesy of BMW OF NORTH AMERICA, INC.