51 13 280 Removing and installing/replacing trim strip on roof frame at left or right (X6 2015-2019)
Special tools required:
- 00 9 321
Graphics are similar.
Lever out trim strip (1) with special tool 00 9 321 starting at the front.
Unclip trim strip (1) in direction of arrow.
Installation note:
Latch mechanisms (1) of clips (2) must not be damaged.
If necessary, replace the clips (2).
Emergency strategy if T-bolt is broken:
Installation note:
Place front trim strip (2) against seal (1).
Trim strip (2) must be flush with edge (3) at rear.
Clip trim strip (2) into place completely.