62 11 280 Removing and installing/replacing instrument panel (X6 2015-2019)

Special tools required:

Attention!

Comply with notes on protection against electrostatic damage (ESD PROTECTION ).

Necessary preliminary work:

Disconnect BATTERY EARTH LEAD .
Disconnect both battery earth leads for F03
Move steering column completely rearwards
If necessary, tape over trim and instrument panel to protect against damage
Remove TRIM FOR INSTRUMENT CLUSTER with F15 and F16.
Only F25 with optional equipment sports steering wheel: Remove sports steering wheel

Insert special tool 64 1 030 in each case in second slot, on left and right, of instrument cluster (2).

Feed special tool 64 1 030 into clamp (1) and pull downward.

Feed out instrument cluster (2) in direction of arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1) and remove instrument cluster (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining tabs (1) of instrument panel (2) must be exactly seated in mountings of dashboard.

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Check values for Condition Based Service (CBS) and correct if necessary.

If necessary, adjust HEAD-UP DISPLAY .