12 63 586 Replacing power distribution module (N55) (X6 xDrive 35i, X6 sDrive 35i)

Necessary preliminary tasks: 

• Switch off ignition.
• Disconnect BATTERY NEGATIVE LEAD .
• Remove MICROFILTER HOUSING .

Lever out expanding rivet.

Release locks in direction of arrow.

Feed out fresh-air duct (1) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cover (2).

Release nut beneath it and set positive battery cable aside.

Tightening torque 12 63 1AZ .

Unlock and pull off all connectors from power distribution module (1).

Release lock (3) in direction of arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Reassemble the vehicle.

Feed out and remove power distribution module.